Show
Per page
Cummins Quiet Connect Series
Tested and certified per the latest EPA, UL and IBC Seismic standards and is capable of meeting NFPA 110 requirements when equipped with the necessary accessories and properly installed. The innovative, flexible exercise mode enables the generator to exercise at a specific day, time, duration and with or without load. The aesthetically appealing enclosure incorporates special designs that deliver the quietest generator of its kind. Aluminum material plus durable powder coated paint provides the best anti-corrosion performance, the generator set enclosure has been evaluated to withstand 180 MPH winds in accordance with ASCE7-10. The intelligent design has removable panels for service and maintenance. Please refer to the Data Sheet for more information and dimensions.
Cummins RS150
Cummins Quiet Connect Series
The Cummins RS13A, RS17A, RS20A line are air cooled that run at 3600RPM.
Tested and certified per the latest EPA, UL and IBC Seismic standards and is capable of meeting NFPA 110 requirements when equipped with the necessary accessories and properly installed. The innovative, flexible exercise mode enables the generator to exercise at a specific day, time, duration and with or without load. The aesthetically appealing enclosure incorporates special designs that deliver the quietest generator of its kind. Aluminum material plus durable powder coated paint provides the best anti-corrosion performance, the generator set enclosure has been evaluated to withstand 180 MPH winds in accordance with ASCE7-10. The intelligent design has removable panels for service and maintenance. Please refer to the Data Sheet for more information and dimensions.
Cummins RS13A, RS17A, RS20A
99893 in stock
$495.00
Use on CAT Gen with PMG, and Shunt. The ADVR-12 is a totally new hybrid 12 Amp universal voltage regulator with a comparable footprint as the Basler* AVC63-12 and AVC125-10, CAT* VR6, KATO* K65-12B and K125-10B, and the Leroy Somer* 202-8634, and many other. To simplify installation, voltage sensing without PT’s up to 520 volts was added, also new DIP & TRIM adjustment compatible with many automatic paralleling and PF controllers in the market. The new CPU design makes the ADVR-12 exceedingly stable, however keeping the analog power circuit for fast response. Single Phase or Three Phase Sensing & Power Input Voltage Regulation < ±0.5% 220/380/440/480VAC Programmable Input IP Switch Selectable 50/60Hz Multiple Excitation System Compatibility: SHUNT, AU X, PMG Inverse-time Over Excitation Protection Under Frequency Protection Soft Start Voltage Ramping EMI Suppression Built-in High Capacity Protection Fuse
The ADVR-12 12 Amp Universal Automatic / Digital Voltage Regulator is a Compatible Replacement for the Caterpillar 3516 - VR6 - VR3 - CDVR - K125-10B - K65-12B Basler Digital AEC63-7 - AVC63-12A - 1DBT63-7 - DECS-100-B15 - DECS-200-2L - Digital DM110 - KR4FF. GEC ALSTHOM C10 / 120 - DX21. COSIMAT N/N3 14392/04.92. Marathon DVR2000 - DVR2000E - PM100 - PM200 - PM300. ABB 1000-7 - EA63-5 - GX300.
100000 in stock
$829.00
The IVT-2470 is used to boost motor starting capacity in shunt generators. It achieves boosting power by converting DC battery power to an AC source for use by the AVR. This independent power behaves in the same way as a PMG, augmenting the generator’s ability to handle a larger motor starting current, thereby exceeding its normal motor starting capabilities. It is easy to install, allowing the unit to be integrated to the generator excitation systems quickly. Suitable for any AVR with AUX. power inputs , Applicable AVR Models;McPherson SS448, ADVR-12, ADVR-2200M, ADVR-250, SS63-12, ADVR-16, ADVR-083.
IVT comes with ADVR-083!!!
100000 in stock
$829.00
The IVT-1270 is used to boost motor starting capacity in shunt generators. It achieves boosting power by converting DC battery power to an AC source for use by the AVR. This independent power behaves in the same way as a PMG, augmenting the generator’s ability to handle a larger motor starting current, thereby exceeding its normal motor starting capabilities. It is easy to install, allowing the unit to be integrated to the generator excitation systems quickly. Suitable for any AVR with AUX. power inputs , Applicable AVR Models;McPherson SS448, ADVR-12, ADVR-2200M, ADVR-250, SS63-12, ADVR-16, ADVR-083.
IVT comes with ADVR-083!!!
100000 in stock
$2,995.00
Please call to Purchase
The ATS-22AG is a programmable automatic transfer switch controller. It’s suitable for single phase systems only, and including all necessary monitoring and protections. The primary function of ATS-22AG controller is to monitor grid / normal street power and to provide the necessary intelligence to operate a seamless automatic transfer of load. Installation, programming and use of the ATS-22AG controller are designed with simplicity in mind. The user-friendly front panel simplifies routine operation, programming and adjustments. This switch is specific to the agricultural and poultry markets. You can purchase this switch at either 225 Amps or 400 Amps.99998 in stock
$2,950.00
The BTB Automatic Transfer Switch integrates the programmable color screen and the switch mechanism into one single unit. It can operate electrically or manually. Its uses Molded Case switches, It has electrical and mechanical interlock protections & safety locks that stops personnel from potential injury or damage. With optional communication modules, users are enabled to control and monitor the Gen-Sets remotely and finally it is easy to install.
99989 in stock
$2,050.00
The BTB Automatic Transfer Switch integrates the programmable color screen and the switch mechanism into one single unit. It can operate electrically or manually. Its uses Molded Case switches, It has electrical and mechanical interlock protections & safety locks that stops personnel from potential injury or damage. With optional communication modules, users are enabled to control and monitor the Gen-Sets remotely and finally it is easy to install.
99943 in stock
125 Amp 2 Pole Automatic Transfer Switch UL Listed
$895.00Mcpherson Controls ATS2PC0125 is a modularized design ATS Automatic Transfer Switch with enclosure. Ideal for residential power systems, with rated current of 125A and rated voltage 110 VAC or 220 VAC single phase to choose from, it is electrically of manually operated and all parts are made with UL 94V-0 plastic for highest safety standards. Please Call for Purchasing.
Data Sheet100000 in stock
150 Amp 2 Pole Automatic Transfer Switch Non-UL Listed
$945.00Please call to Purchase
McPherson Controls TCS2P150 is modularized design Automatic Transfer Switch, also known as ATS. With rated current of 150Amp and rated voltage of 110 VAC or 220 VAC single phase. It is electrically and manually operated. This Automatic Transfer Switch is ideal for household and telecommunication cell site use. All plastic parts used on the ATS are made with UL 94V-0 plastic to comply with the highest safety standards. Non-UL Listed Export Only, Please Call for Purchasing.
Data Sheet100000 in stock
Please call to Purchase
The 4-Way Redundant Transfer Switch controls your Normal Street-Power with 3 Stand-By Emergency Generators . If any generator fails the next generator in-line will automatically take over. the controls used are one ATS-22 and two ATS-34. Pictured is the 800 Amp 4-Way Redundant Transfer Siwtch that was order by the United Nations for Haiti. Please Call for any inquiries or for purchasing.99995 in stock
125 Amp 3 Pole Automatic Transfer Switch Non-UL Listed
$995.00The ATS3PC0125 is a brand new modularized PC type ATS Automatic Transfer Switch with enclosure. Ideal for household power systems and telecommunication cell site, with rated current of 125A and rated voltage 110 VAC or 220 VAC single phase to choose from, it can be electrically and manually operated and all parts are made with UL 94V-0 plastic for highest safety standards.
Data Sheet100000 in stock
$6,500.00
BTS3BC1600 / BTS4BC1600 is the 1600 Amp 3 pole and 4 pole manual and motor operated MCCB type Basic Transfer Switch. The BTS Complies with IEC60947-6-1 standards and features High Short Circuit Breaking Capacity, OCPD (Over Current Protection Device), AUX (Auxiliary Limit Switch), Bus Bars with UL approved insulation sleeve, Mechanical Interlock, and Plug-in connector for quick and fault free connection to the transformer module or controller.
Features:- High Short Circuit Breaking Capacity
- Incorporate OCPD*1 Design
- MCCB Has Auxiliary Limit Switch Inside
- Reliable Motor -- Operated Transfer Mechanism
- Molded Insulating Manual Handle
- PVC-Coated Bus Bar > 3KV Insulation
- With Mechanical Interlock
- Includes Plug-in Connector, For Simple Hook-up to Controller
- Complies with IEC60947-6-1 Requirements*2
- Preassembled reinforced Aluminum Base (See picture on Right)*3
- *1 OCPD : Over Current Protection Device
- *2 IEC60947-6-1 Requirements :
- IEC60947-6-1 Class CB : ATS provided with over current releases and the main contacts of which are capable of making and are intended for breaking short circuit currents.
- IEC60947-6-1 Utilization Category AC-33A :
- Frequent operations.
- Motor loads or mixed loads including motors, resistive loads and up to 30% incandescent lamp.
- *3 The purpose of aluminum base design :
- To prevent occurrence of eddy current (Foucault current) which reacts with steel board and cause excessive heat.
- The use of aluminum base plate also greatly reduces product weight.
100000 in stock
$3,854.50
BTS4BE1000 is the 1000 Amp 4 pole manual and motor operated MCCB type Basic Transfer Switch. The BTS Complies with IEC60947-6-1 standards and features High Short Circuit Breaking Capacity, OCPD (Over Current Protection Device), AUX (Auxiliary Limit Switch), Bus Bars with UL approved insulation sleeve, Mechanical Interlock, and Plug-in connector for quick and fault free connection to the transformer module or controller.
Data Sheet100000 in stock
$2,216.00
BTS4BE0800 is a 800 Amp 4 pole manual and motor operated MCCB type Basic Transfer Switch. The BTS Complies with IEC60947-6-1 standards and features High Short Circuit Breaking Capacity, OCPD (Over Current Protection Device), AUX (Auxiliary Limit Switch), Bus Bars with UL approved insulation sleeve, Mechanical Interlock, and Plug-in connector for quick and fault free connection to the transformer module or controller.
Data Sheet100000 in stock
$1,910.00
BTS4BE0600 is a 600 Amp 4 pole manual and motor operated MCCB type Basic Transfer Switch. The BTS Complies with IEC60947-6-1 standards and features High Short Circuit Breaking Capacity, OCPD (Over Current Protection Device), AUX (Auxiliary Limit Switch), Bus Bars with UL approved insulation sleeve, Mechanical Interlock, and Plug-in connector for quick and fault free connection to the transformer module or controller.
Data Sheet99956 in stock
$660.00
The TCS2P125 new modularized design Automatic Transfer Switch, also known as ATS. With rated current of 125A and rated voltage of 110 VAC or 220 VAC single phase. It is electrically and manually operated. This Automatic Transfer Switch is ideal for household and telecommunication cell site use. All plastic parts used on the ATS are made with UL 94V-0 plastic to comply with the highest safety standards.
Data SheetShowing 21–40 of 100 results
