- Generator Sets
- Automatic Switches
- Mcpherson Controls
- Voltage Regulators
- 125A & 150A Transfer Switches 2P, 3P, & 4P
- Automatic Transfer Switches 2P 200A-400A
- Automatic Transfer Switches – 3P 225A-1600A
- Basic Transfer Switches 2P 225A-400A
- Basic Transfer Switches 3P 225A-1600A
- Basic Transfer Switches (4 POLE 225 AMP-1600 AMP)
- Governors
- ATS Controls
- Battery Chargers
- Engine Controls
- Accessories
- Generator Auxiliary Excitation Booster
- Product Info
- About
- 360 Virtual Tour
- Generator Sets
- Automatic Switches
- Mcpherson Controls
- Voltage Regulators
- 125A & 150A Transfer Switches 2P, 3P, & 4P
- Automatic Transfer Switches 2P 200A-400A
- Automatic Transfer Switches – 3P 225A-1600A
- Basic Transfer Switches 2P 225A-400A
- Basic Transfer Switches 3P 225A-1600A
- Basic Transfer Switches (4 POLE 225 AMP-1600 AMP)
- Governors
- ATS Controls
- Battery Chargers
- Engine Controls
- Accessories
- Generator Auxiliary Excitation Booster
- Product Info
- About
- 360 Virtual Tour
PTM-15
Return to Previous PageProduct Information
The PTM-15 is a self-seeking power supply designed to work with the ATS-22-DC Auto Transfer Switch Controller when DC power is not available. But it can also work with other makes and models. The module can supply DC power to any control from the Normal or Emergency AC input to the
ATS.
$140.00
Categories: McPherson Controls, ATS Controls
Tags: ats controls, ac to dc, ac to dc converter, universal ac to dc converter, mcpherson controls
Universal AC to DC converter.
| Weight | 1 lbs |
|---|---|
| Dimensions | 10 × 8 × 6 in |
Related Products
99999 in stock
ATS-34
$455.00We use the ATS-34 to control the second ATS in a redundant emergency ATS system. A redundant ATS system consists of two ATS, the first ATS being a normal standard ATS that triggers the second ATS using the ATS-34 control. This second ATS control selects which backup generator is the first to run and in the case of a fail start or a breakdown restores power by switching to a second generator.
The ATS-34 Controller provides programming flexibility for the two backup generators. Therefore, the ATS switch operates properly through a series of sensing and timing functions ATS-34 controller allows you to control the generator duty cycle and alternate operation of the two generators.99971 in stock
ATS22/Ph3/Kit
$455.00
The ATS-22 3 Phase Kit works on Voltages from 220V-480V. As simple as changing a wire and programming the control, this versatile controller will be ready to use with it simple 25-Line Step-by-Step programming. Works with our MTS Basic Transfer Switches with the same Plug-in-Play connection that all of our past ATS Controlers have. DC Powered.
ATS-22A-DC Manual
ATS-22A-DC PIC
99956 in stock
ATS-22A
$395.00
Transfer switches protect critical electrical loads against loss of power. A standby (emergency) generator backs up the normal grid power. The transfer switch connects either the normal or the emergency supply to the load. When power is lost from the grid, the transfer switch transfers the load to the standby source. Eventually after the grid is restored, the ATS connects the load back to the grid.
The ATS-22A is a multi-function programmable logic automatic transfer switch controller. Suitable for single and 3 phase system, including all necessary monitoring and protections. It works with most transfer switch in the marketplace.
RA200 SE
$911.00
The RA200 is a 200 amp, single phase Automatic Transfer Switch is soley integrated with the RS series genset. These products are Listed to UL 1008, the Standard for Transfer Switch Safety. The switch and generator set combination is specifically designed for a simplified, quicker installation.The RA transfer switch monitors utility power 24 hours a day and 7 days a week. When utility power becomes unsatisfactory or fails; the generator set is signaled to start, then automatically transfers the load. When stable utility voltage returns, the transfer switch will automatically switch electrical load from the generator to the utility. No action is required by he home owner. The RA switch is also available in Service Entrance models. A service entrance version is also UL 1008 listed and makes use of a UL 489 listed circuit breaker.
RA 100A Spec Sheet
99894 in stock
ATS-22AG
$395.00
Transfer switches protect critical electrical loads against loss of power. A standby (emergency) generator backs up the normal grid power. The transfer switch connects either the normal or the emergency supply to the load. When power is lost from the grid, the transfer switch transfers the load to the standby source. Eventually after the grid is restored, the ATS connects the load back to the grid.
The ATS-22AG dedicated single phase programmable logic automatic transfer switch controller, including all necessary monitoring and protections. It works with most transfer switch in the marketplace.
Included- Controller Only
99998 in stock
ATS-PLC
$995.00
The ATS-PLC is a programmable multi-function touch-screen automatic transfer switch controller with a 5.7 inch color touch screen. It incorporates internally most operational relays and can easily replaces all conventional ATS controller. The interface is friendly with plenty of settings and configurations to suit almost all ATSs. It works with single phase/3 phase 3 wires/ 3 phase 4 wires systems.Can be easily adapted to almost all types ATS switches from numerous manufacturers, and can be used as a retrofit controller to update an existing switch or in the assembly and constructions of new Transfer Switches. It incorporates modern Internet controls and communication protocols.
RA400 SE
$3,213.00
The RA400 is a 400 amp, single phase Automatic Transfer Switch is soley integrated with the RS series genset. These products are Listed to UL 1008, the Standard for Transfer Switch Safety. The switch and generator set combination is specifically designed for a simplified, quicker installation.The RA transfer switch monitors utility power 24 hours a day and 7 days a week. When utility power becomes unsatisfactory or fails; the generator set is signaled to start, then automatically transfers the load. When stable utility voltage returns, the transfer switch will automatically switch electrical load from the generator to the utility. No action is required by he home owner. The RA switch is also available in Service Entrance models. A service entrance version is also UL 1008 listed and makes use of a UL 489 listed circuit breaker.
RA 400A Spec Sheet
99836 in stock
ATS22/Ph1/KT
$425.00
This Automatic Transfer Switch Controller is for a dedicated single phase transfer switch. With "Plug-In-Play" harnesses and with only 15 lines of programming, we kept Install and Setup quick and easy. Specific to MTS Basic Transfer Switchs, you can keep your old enclosure and just install our switch and controller.
ATS-22AG Manual
© 2016 MTS Power Products. All Rights Reserved.
WordPress Web Design by UltraWeb Marketing
WordPress Web Design by UltraWeb Marketing
