- Generator Sets
- Automatic Switches
- Mcpherson Controls
- Voltage Regulators
- 125A & 150A Transfer Switches 2P, 3P, & 4P
- Automatic Transfer Switches 2P 200A-400A
- Automatic Transfer Switches – 3P 225A-1600A
- Basic Transfer Switches 2P 225A-400A
- Basic Transfer Switches 3P 225A-1600A
- Basic Transfer Switches (4 POLE 225 AMP-1600 AMP)
- Governors
- ATS Controls
- Battery Chargers
- Engine Controls
- Accessories
- Generator Auxiliary Excitation Booster
- Product Info
- About
- 360 Virtual Tour
- Generator Sets
- Automatic Switches
- Mcpherson Controls
- Voltage Regulators
- 125A & 150A Transfer Switches 2P, 3P, & 4P
- Automatic Transfer Switches 2P 200A-400A
- Automatic Transfer Switches – 3P 225A-1600A
- Basic Transfer Switches 2P 225A-400A
- Basic Transfer Switches 3P 225A-1600A
- Basic Transfer Switches (4 POLE 225 AMP-1600 AMP)
- Governors
- ATS Controls
- Battery Chargers
- Engine Controls
- Accessories
- Generator Auxiliary Excitation Booster
- Product Info
- About
- 360 Virtual Tour
ECU-05 12 Volts
Return to Previous PageProduct Information
The ECU-04 and ECU-05 12 VDC, 100 VAC to 240 VAC Universal Add-on Auto-Start Control for all manual key start generator sets, simply changes any manual key start generator to auto-start type.
$189.95
99462 in stock
SKU: ECU-05 12 Volts
Category: Engine Controls
Features:
- Microprocessor Automatically Mimics The Manual Start Procedure
- Simple Installation, Without Changing Original Wiring
- Easy to Set Up, low-cost, Small Size, Low Power Consumption
- For Use In Gasoline And Diesel Generators
- Three Attempts Multi-Start Function
- Circuits Are Protected With 94-V0 Epoxy
- Two Adjustable Time Delay Potentiometers
| Weight | 2 lbs |
|---|---|
| Dimensions | 7 × 5 × 2.5 in |
Related Products
99999 in stock
GCU-100
$495.00GCU-100 Generator Automatic Control and Protection Module is suitable for most generators available on the market, it is equipped with graphical warning signals and 3 sets of 4 digits LED display to display the real time 3 phase voltage, current, frequency, battery volt, running hours and setting values.
Data Sheet
100000 in stock
AMF-10
$249.00The AMF-10 is an universal Automatic Mains Failure Control & Protection Module. It is a control and protection module for the generator and a monitoring controller for the Automatic Transfer Switch. The modularity design with easy to read high illuminant LED display, universal warning symbols and easy to operate interface, all functions settings can be programmed directly from the front panel. Optional AMF-10R universal AMF Controller Interface Module (relay module) is available for the AMF-10 to simplify the wiring and connection process.
99959 in stock
ECU-05 24 Volts
$189.95The ECU-04 and ECU-05 24 VDC, 100 VAC to 240 VAC Universal Add-on Auto-Start Control for all manual key start generator sets, simply changes any manual key start generator to auto-start type.
100000 in stock
RA-20
$145.00RA-20 is a remote annunciator module for GCU-20 or other genset controller. With universal LED graphic interface, RA-20 can display generator status and failures. Its main function is to simplify all wiring with pluggable terminal block. RA-20 works up to 1500 Meters from the host module using 18 AWG Cable.
99939 in stock
GCU-10
$189.95GCU-10
Generator Control Unit
The GCU-10 Generator Control Unit is an universal economical programmable genset controller. Equipped with high illuminating LED with universal graphical interface helps to notify the operator the generator status. Optional relay module GCU-11R (12V/24V) helps to simplify the wiring and connection process.
Data Sheet99971 in stock
GCU-20
$269.95GCU-20 Automatic Engine & Generator Control Unit has many useful functions like annunciator alarm output and selectable EM81/EM121 MPU signal for speed sensing. It's suitable for pump engine control. GCU-20 also provide IDLE control for electronic governors.
99959 in stock
GCU-10/DSP-10 Kit
$499.95GCU-10/DSP-10 Kit
Generator Control Unit
The GCU-10/DSP-10 Generator Control Units are universal economical programmable genset controllers. Equipped with high illuminating LED with universal graphical interface helps to notify the operator the generator status. Optional relay module GCU-11R (12V/24V) helps to simplify the wiring and connection process.
Brochure Drawing99973 in stock
GCU-44 NEXYS Kit
$499.95GCU-44 NEXYS Kit
Generator Control Unit
GCU-44 control panel contains GCU-10 automatic engine control unit and DSP-10 Genset multi-function display module, which is specially designed to replace NEXYS controller. Simply connect the corresponding wire of the new harness of the GCU-44 to the original connector to easily complete the replacement. For detailed functions and settings of GCU-10 and DSP-10, refer to the contents of the user manual below.
Manual© 2016 MTS Power Products. All Rights Reserved.
WordPress Web Design by UltraWeb Marketing
WordPress Web Design by UltraWeb Marketing
