McPherson Controls
Return to Previous Page
Show
Per page
99959 in stock
$189.95
The ECU-04 and ECU-05 24 VDC, 100 VAC to 240 VAC Universal Add-on Auto-Start Control for all manual key start generator sets, simply changes any manual key start generator to auto-start type.
99460 in stock
$189.95
The ECU-04 and ECU-05 12 VDC, 100 VAC to 240 VAC Universal Add-on Auto-Start Control for all manual key start generator sets, simply changes any manual key start generator to auto-start type.
99970 in stock
$269.95
GCU-20 Automatic Engine & Generator Control Unit has many useful functions like annunciator alarm output and selectable EM81/EM121 MPU signal for speed sensing. It's suitable for pump engine control. GCU-20 also provide IDLE control for electronic governors.
100000 in stock
$145.00
RA-20 is a remote annunciator module for GCU-20 or other genset controller. With universal LED graphic interface, RA-20 can display generator status and failures. Its main function is to simplify all wiring with pluggable terminal block. RA-20 works up to 1500 Meters from the host module using 18 AWG Cable.
100000 in stock
$249.00
The AMF-10 is an universal Automatic Mains Failure Control & Protection Module. It is a control and protection module for the generator and a monitoring controller for the Automatic Transfer Switch. The modularity design with easy to read high illuminant LED display, universal warning symbols and easy to operate interface, all functions settings can be programmed directly from the front panel. Optional AMF-10R universal AMF Controller Interface Module (relay module) is available for the AMF-10 to simplify the wiring and connection process.
99999 in stock
$495.00
GCU-100 Generator Automatic Control and Protection Module is suitable for most generators available on the market, it is equipped with graphical warning signals and 3 sets of 4 digits LED display to display the real time 3 phase voltage, current, frequency, battery volt, running hours and setting values.
Data Sheet
99992 in stock
$189.95
The DSP-10 Genset Multi-Function Display Module is an universal compact integrated digital displayer. It can be installed solely or joint with GCU-10.
99973 in stock
$499.95
GCU-44 NEXYS Kit
Generator Control Unit
GCU-44 control panel contains GCU-10 automatic engine control unit and DSP-10 Genset multi-function display module, which is specially designed to replace NEXYS controller. Simply connect the corresponding wire of the new harness of the GCU-44 to the original connector to easily complete the replacement. For detailed functions and settings of GCU-10 and DSP-10, refer to the contents of the user manual below.
Manual99959 in stock
$499.95
GCU-10/DSP-10 Kit
Generator Control Unit
The GCU-10/DSP-10 Generator Control Units are universal economical programmable genset controllers. Equipped with high illuminating LED with universal graphical interface helps to notify the operator the generator status. Optional relay module GCU-11R (12V/24V) helps to simplify the wiring and connection process.
Brochure Drawing99939 in stock
$189.95
GCU-10
Generator Control Unit
The GCU-10 Generator Control Unit is an universal economical programmable genset controller. Equipped with high illuminating LED with universal graphical interface helps to notify the operator the generator status. Optional relay module GCU-11R (12V/24V) helps to simplify the wiring and connection process.
Data Sheet99790 in stock
$350.00
TO REPLACE THE SS16A-2
Universal 16 Amp 1/2 Wave Self Excited Automatic Voltage Regulator can be used in parallel operation.
Compatible with Mecc Alte* UVR6, Marelli Motori* M40FA640A-MARK I and Caterpillar* AVR Marelli M40FA640A - M16FA650A - M16FA655A - M25FA600A - M16FA600A - M25SA600A - Basler BECS200 - KR4FFX - KR4 - KR7 - AEC63-7 - Caterpillar 3516B - VR65 - VR6 - 85Z 11892 - 3406 - VR3
99543 in stock
$150.00
Replaces SS-053 & ADVR-053
Self Excited, 5 amp automatic voltage regulator.
The ADVR-54 is a compact size, robust and high reliable voltage regulator. Innovative heat sink significantly increases cooling efficiency. Working on 220/380/440/480 Vac with selectable switches. Capable soft start voltage ramping, over excitation protection and a digital low frequency protection circuit, preventing thermal drift. EMI suppression and automatic shut off output when voltage sensing is lost, with a built-in high capacity fuse.
99980 in stock
$299.95
Hybrid Analog/Digital, Voltage Regulator
Compatible with Stamford AS440* & AS465-2*
Not a genuine Newage product.
Data Sheet
99628 in stock
$429.95
Replaces Marathon DVR-2000 Series
ADVR-2200M is an Digital/Analog hybrid voltage regulator that substitutes certain Marathon DVR applications. This regulator can work with either single or three phase sensing and PMG. The ADVR-2200M as protection against over excitation, as well PF (power factor) correction inputs. And also as capabilities for DROOP Paralleling.
99849 in stock
$175.00
Direct Replacement for the Marathon PM300
The SS300 voltage regulator is an encapsulated electronic voltage regulator which controls the output of a brushless AC generator by regulating the current into the exciter field.
99515 in stock
$175.00
Replacemenet for Marathon SE350
McPherson Controls Self Excited Brushless Type Generator Automatic Voltage Regulator
Not a genuine Marathon product.
99997 in stock
$120.00
Self Excited Brushless Type Genset Voltage Regulator 63 VDC Sensing 220 VAC or 400 VAC
Showing 41–60 of 82 results
