McPherson Controls
Return to Previous Page
Show
Per page
99956 in stock
$660.00
The TCS2P125 new modularized design Automatic Transfer Switch, also known as ATS. With rated current of 125A and rated voltage of 110 VAC or 220 VAC single phase. It is electrically and manually operated. This Automatic Transfer Switch is ideal for household and telecommunication cell site use. All plastic parts used on the ATS are made with UL 94V-0 plastic to comply with the highest safety standards.
Data Sheet100000 in stock
$850.00
BTS3BE0225 is the 225 Amp 3 pole manual and motor operated MCCB type Basic Transfer Switch. The BTS Complies with IEC60947-6-1 standards and features High Short Circuit Breaking Capacity, OCPD (Over Current Protection Device), AUX (Auxiliary Limit Switch), Bus Bars with UL approved insulation sleeve, Mechanical Interlock, and Plug-in connector for quick and fault free connection to the transformer module or controller.
99996 in stock
$995.00
BTS3BE0225 is the 225 Amp 3 pole manual and motor operated MCCB type Basic Transfer Switch. The BTS Complies with IEC60947-6-1 standards and features High Short Circuit Breaking Capacity, OCPD (Over Current Protection Device), AUX (Auxiliary Limit Switch), Bus Bars with UL approved insulation sleeve, Mechanical Interlock, and Plug-in connector for quick and fault free connection to the transformer module or controller.
99995 in stock
$1,190.00
BTS3BE0400 is the 400 Amp 3 pole manual and motor operated MCCB type Basic Transfer Switch. The BTS Complies with IEC60947-6-1 standards and features High Short Circuit Breaking Capacity, OCPD (Over Current Protection Device), AUX (Auxiliary Limit Switch), Bus Bars with UL approved insulation sleeve, Mechanical Interlock, and Plug-in connector for quick and fault free connection to the transformer module or controller.
Drawing100000 in stock
$2,150.00
BTS3BE0600 are the 600 Amp 3 pole motor operated MCCB type Basic Transfer Switch. The BTS Complies with IEC60947-6-1 standards and features High Short Circuit Breaking Capacity, OCPD (Over Current Protection Device), AUX (Auxiliary Limit Switch), Bus Bars with UL approved insulation sleeve, Mechanical Interlock, and Plug-in connector for quick and fault free connection to the transformer module or controller.
Data Sheet100000 in stock
$2,610.00
BTS3BE0800 is an 800 Amp 3 pole manual and motor operated MCCB type Basic Transfer Switch. The BTS Complies with IEC60947-6-1 standards and features High Short Circuit Breaking Capacity, OCPD (Over Current Protection Device), AUX (Auxiliary Limit Switch), Bus Bars with UL approved insulation sleeve, Mechanical Interlock, and Plug-in connector for quick and fault free connection to the transformer module or controller.
Data Sheet100000 in stock
$3,696.00
BTS3BE1000 is the 1000 Amp 3 pole manual and motor operated MCCB type Basic Transfer Switch. The BTS Complies with IEC60947-6-1 standards and features High Short Circuit Breaking Capacity, OCPD (Over Current Protection Device), AUX (Auxiliary Limit Switch), Bus Bars with UL approved insulation sleeve, Mechanical Interlock, and Plug-in connector for quick and fault free connection to the transformer module or controller.
Data Sheet100000 in stock
$5,350.00
BTS3BE1200 is the 1200 Amp 3 pole manual and motor operated MCCB type Basic Transfer Switch. The BTS Complies with IEC60947-6-1 standards and features High Short Circuit Breaking Capacity, OCPD (Over Current Protection Device), AUX (Auxiliary Limit Switch), Bus Bars with UL approved insulation sleeve, Mechanical Interlock, and Plug-in connector for quick and fault free connection to the transformer module or controller.
Data Sheet100000 in stock
$8,133.00
BTS4BC1600 is the 1600 Amp 3 pole manual and motor operated MCCB type Basic Transfer Switch. The BTS Complies with IEC60947-6-1 standards and features High Short Circuit Breaking Capacity, OCPD (Over Current Protection Device), AUX (Auxiliary Limit Switch), Bus Bars with insulation sleeve, Mechanical Interlock, and Plug-in connector for quick and fault free connection to the transformer module or controller. This switch is Non-UL.
Data Sheet99974 in stock
$825.00
The TCS3P125 is a brand new modularized design Automatic Transfer Switch, also known as ATS. With rated current of 125A and rated voltage of 110 VAC or 220 VAC or 3 phase to choose from. It is electrically and manually operated. This Automatic Transfer Switch is ideal for household and telecommunication cell site use. All plastic parts used on the ATS are made with UL 94V-0 plastic to comply with the highest safety standards.
99984 in stock
$415.00
Simple to install and setup Digital Engine Governor for use in Gas and Diesel Generators with smoke and idle controls working off the generator frequency, (no MPU needed) With installation feedback help and compatibility with all types of actuators and PT Pumps.
The EG4016 Governor uses generator frequency to control engine speed. It works without a magnetic pickup (MPU), a digital circuit detects the reference frequency from the generators output.
Digital governors are not influenced by frequency drift caused by temperature. This control uses advanced PID Algorithms, together with GAIN and DIF pots to simplify adjustments and governor response. The EG4016 can be used in all types of engine actuators that work with less then 15Amps and Cummins PT PUMP. LED’s give feedback to determine perational and fault conditions making it easy to install and calibrate.
99893 in stock
$360.00
Universal Electronic Engine Governor Controller
The EG3000 Universal Generator Electronic Governor Controller is equipped with Smoke Limiting, & Idle Speed. It's suitable for diesel, gas and natural gas engines with Built-in & Non-Built-in PTs Pumps. Used worldwide as a Compatible Replacement for the following models:
Cummins: 3062322 - 3419988 - 3098693 - 3044196 - 4913988-BI.
Barber Colman: DYN1 10794-000-0-24 - DYN1-10654-000-0-24 - DYN1-1065X Series - DYN1-1069X Series - DYN1-10754-000-0-12 - DYN1-10754-001-0-24 - DYN1-10704-000-0-12 - DYN1-10704-000-0-24 - DYN1-10754-004-0-24.
GAC: ESD2210-12 - ESD5111 - ESD5221 - ESD5500 - ESD5500E - ESD5500E K77255 - ESD5550 - ESC63C.
Woodward: 8290-038 - 8290-147 - 8290-185 - 8290-190 - DPG2101-000-012 - DPG-2104 - DPG-2201-002 - 8290-184 - 8270-1033 (12V) - EPG P/N 8290-189.
EG3002 Manual99971 in stock
$455.00
The ATS-22 3 Phase Kit works on Voltages from 220V-480V. As simple as changing a wire and programming the control, this versatile controller will be ready to use with it simple 25-Line Step-by-Step programming. Works with our MTS Basic Transfer Switches with the same Plug-in-Play connection that all of our past ATS Controlers have. DC Powered.
ATS-22A-DC Manual
ATS-22A-DC PIC
99836 in stock
$425.00
This Automatic Transfer Switch Controller is for a dedicated single phase transfer switch. With "Plug-In-Play" harnesses and with only 15 lines of programming, we kept Install and Setup quick and easy. Specific to MTS Basic Transfer Switchs, you can keep your old enclosure and just install our switch and controller.
ATS-22AG Manual
99998 in stock
$995.00
The ATS-PLC is a programmable multi-function touch-screen automatic transfer switch controller with a 5.7 inch color touch screen. It incorporates internally most operational relays and can easily replaces all conventional ATS controller. The interface is friendly with plenty of settings and configurations to suit almost all ATSs. It works with single phase/3 phase 3 wires/ 3 phase 4 wires systems.Can be easily adapted to almost all types ATS switches from numerous manufacturers, and can be used as a retrofit controller to update an existing switch or in the assembly and constructions of new Transfer Switches. It incorporates modern Internet controls and communication protocols.
100000 in stock
$455.00
The ATS-33 controller represents a state-of the-art advancement in automatic transfer switch controls,where utility power is unavailable and generators must be in a constant operational state. The ATS-33 design is specifically tailored for the dual generator; power system: a two-generator system, one primary generator and its back-up or stand-by generator.The ATS-33 controller manages the automatic start-up and transfer of load between the primary and stand-by generators, whether the power-loss is an unexpected event or scheduled. Additionally, the controller can be programmed to deliver a set operation duty cycle, which enables both the primary and stand by generators to operate in relay duty.The ATS-33 Controller provides an unmatched degree of programmed flexibility. It provides all the necessary administration to ensure that the ATS switch operates properly through a series of programmed sensing and timing functions.
99956 in stock
$395.00
Transfer switches protect critical electrical loads against loss of power. A standby (emergency) generator backs up the normal grid power. The transfer switch connects either the normal or the emergency supply to the load. When power is lost from the grid, the transfer switch transfers the load to the standby source. Eventually after the grid is restored, the ATS connects the load back to the grid.
The ATS-22A is a multi-function programmable logic automatic transfer switch controller. Suitable for single and 3 phase system, including all necessary monitoring and protections. It works with most transfer switch in the marketplace.
99999 in stock
$455.00
We use the ATS-34 to control the second ATS in a redundant emergency ATS system. A redundant ATS system consists of two ATS, the first ATS being a normal standard ATS that triggers the second ATS using the ATS-34 control. This second ATS control selects which backup generator is the first to run and in the case of a fail start or a breakdown restores power by switching to a second generator.
The ATS-34 Controller provides programming flexibility for the two backup generators. Therefore, the ATS switch operates properly through a series of sensing and timing functions ATS-34 controller allows you to control the generator duty cycle and alternate operation of the two generators.
$140.00
The PTM-15 is a self-seeking power supply designed to work with the ATS-22-DC Auto Transfer Switch Controller when DC power is not available. But it can also work with other makes and models. The module can supply DC power to any control from the Normal or Emergency AC input to the
ATS.
PTM-15 Manual
Showing 21–40 of 82 results
