- Generator Sets
- Automatic Switches
- Mcpherson Controls
- Voltage Regulators
- 125A & 150A Transfer Switches 2P, 3P, & 4P
- Automatic Transfer Switches 2P 200A-400A
- Automatic Transfer Switches – 3P 225A-1600A
- Basic Transfer Switches 2P 225A-400A
- Basic Transfer Switches 3P 225A-1600A
- Basic Transfer Switches (4 POLE 225 AMP-1600 AMP)
- Governors
- ATS Controls
- Battery Chargers
- Engine Controls
- Accessories
- Generator Auxiliary Excitation Booster
- Product Info
- About
- 360 Virtual Tour
- Generator Sets
- Automatic Switches
- Mcpherson Controls
- Voltage Regulators
- 125A & 150A Transfer Switches 2P, 3P, & 4P
- Automatic Transfer Switches 2P 200A-400A
- Automatic Transfer Switches – 3P 225A-1600A
- Basic Transfer Switches 2P 225A-400A
- Basic Transfer Switches 3P 225A-1600A
- Basic Transfer Switches (4 POLE 225 AMP-1600 AMP)
- Governors
- ATS Controls
- Battery Chargers
- Engine Controls
- Accessories
- Generator Auxiliary Excitation Booster
- Product Info
- About
- 360 Virtual Tour
ADVR-083
Return to Previous PageProduct Information
$429.95
Analog / Digital AVR, Single-phase / Three-phase Voltage detection, 8 Amp, Voltage Regulator for use with Auxiliary Winding, Harmonic Winding, Harmonic + Auxiliary Winding, PMG, and self-excited (SHUNT) self- excited brushless-type generators.
| Weight | 2 lbs |
|---|---|
| Dimensions | 2 × 4 × 4.5 in |
Related Products
99990 in stock
SS50FW
$650.00
Replacement for Carbon Brush Type Generators
McPherson Controls 50 Amp Fullwave Static Regulator
99790 in stock
ADVR-16
$350.00
TO REPLACE THE SS16A-2
Universal 16 Amp 1/2 Wave Self Excited Automatic Voltage Regulator can be used in parallel operation.
Compatible with Mecc Alte* UVR6, Marelli Motori* M40FA640A-MARK I and Caterpillar* AVR Marelli M40FA640A - M16FA650A - M16FA655A - M25FA600A - M16FA600A - M25SA600A - Basler BECS200 - KR4FFX - KR4 - KR7 - AEC63-7 - Caterpillar 3516B - VR65 - VR6 - 85Z 11892 - 3406 - VR3
99849 in stock
SS300
$175.00
Direct Replacement for the Marathon PM300
The SS300 voltage regulator is an encapsulated electronic voltage regulator which controls the output of a brushless AC generator by regulating the current into the exciter field.
99962 in stock
SS-KOH
$150.00
Replacement for Kohler infrared photo coupler C-255370
McPherson Controls Self excited AVR
Not a genuine Kohler part
PTM-15
$140.00
The PTM-15 is a self-seeking power supply designed to work with the ATS-22-DC Auto Transfer Switch Controller when DC power is not available. But it can also work with other makes and models. The module can supply DC power to any control from the Normal or Emergency AC input to the
ATS.
PTM-15 Manual
Sale!
100000 in stock
EW05
AVR for Welder Generators
Replacement for
ew05-manual-enhttps://mtspowerproducts.com/admin/drawing/ew05-dimension.jpg
| Brand | Model |
|---|---|
| SUZUKI | CCW-210 , CCW-190H |
| HONDA | EW-190S |
| DAISHIN | SGW-200HX |
| KAIYU | SGW-190X |
RA400 SE
$3,213.00
The RA400 is a 400 amp, single phase Automatic Transfer Switch is soley integrated with the RS series genset. These products are Listed to UL 1008, the Standard for Transfer Switch Safety. The switch and generator set combination is specifically designed for a simplified, quicker installation.The RA transfer switch monitors utility power 24 hours a day and 7 days a week. When utility power becomes unsatisfactory or fails; the generator set is signaled to start, then automatically transfers the load. When stable utility voltage returns, the transfer switch will automatically switch electrical load from the generator to the utility. No action is required by he home owner. The RA switch is also available in Service Entrance models. A service entrance version is also UL 1008 listed and makes use of a UL 489 listed circuit breaker.
RA 400A Spec Sheet
99956 in stock
ATS-22A
$395.00
Transfer switches protect critical electrical loads against loss of power. A standby (emergency) generator backs up the normal grid power. The transfer switch connects either the normal or the emergency supply to the load. When power is lost from the grid, the transfer switch transfers the load to the standby source. Eventually after the grid is restored, the ATS connects the load back to the grid.
The ATS-22A is a multi-function programmable logic automatic transfer switch controller. Suitable for single and 3 phase system, including all necessary monitoring and protections. It works with most transfer switch in the marketplace.
99997 in stock
SS75FW
$1,200.00
Replacement for Carbon Brush Type generators
McPherson Controls 75 Amp Fullwave Static regulator
© 2016 MTS Power Products. All Rights Reserved.
WordPress Web Design by UltraWeb Marketing
WordPress Web Design by UltraWeb Marketing
