ATS-22A

This Automatic Transfer Switch Controller is for a dedicated single phase transfer switch. With "Plug-In-Play" harnesses and with only 15 lines of programming, we kept Install and Setup quick and easy. Specific to MTS Basic Transfer Switchs, you can keep your old enclosure and just install our switch and controller. ATS-22AG Manual

The ATS-33 controller represents a state-of the-art advancement in automatic transfer switch controls,where utility power is unavailable and generators must be in a constant operational state. The ATS-33 design is specifically tailored for the dual generator; power system: a two-generator system, one primary generator and its back-up or stand-by generator.The ATS-33 controller manages the automatic start-up and transfer of load between the primary and stand-by generators, whether the power-loss is an unexpected event or scheduled. Additionally, the controller can be programmed to deliver a set operation duty cycle, which enables both the primary and stand by generators to operate in relay duty.The ATS-33 Controller provides an unmatched degree of programmed flexibility. It provides all the necessary administration to ensure that the ATS switch operates properly through a series of programmed sensing and timing functions.

Transfer switches protect critical electrical loads against loss of power. A standby (emergency) generator backs up the normal grid power. The transfer switch connects either the normal or the emergency supply to the load. When power is lost from the grid, the transfer switch transfers the load to the standby source. Eventually after the grid is restored, the ATS connects the load back to the grid. The ATS-22AG dedicated single phase programmable logic automatic transfer switch controller, including all necessary monitoring and protections. It works with most transfer switch in the marketplace. Included- Controller Only